Cotton Carrier Adapter Plate

Works great with my cotton carrier and with my Hepi tripod on my Sony RX 10 IV. Little pricey but worth it!

Thought this was way over priced but it ended up working great so I can use my camera in my chest pack and on my tripod using 2 different configurations. Still over priced though.

Now you can use your tripod

Updated Review: July 10th, 2014 It occurs to me that someone with the vertical grip for the A77 would be able to use this plate on the vertical grip's tripod mount. It would not block the battery door since the door is on the side. Updated Review: July 4th, 2014 Okay, I've gotten the cotton carrier universal adapter plate to work on my Sony alpha A77 by using an intermediate adapter plate, the Neewer PU70. Mainly, I'm making use of the PU70's additional mounting holes to allow me to mount the Cotton Carrier plate to the Neewer plate. Then the Cotton Carrier Hub mounts to the Cotton Carrier Universal Adapter plate and my tripod's Arca Swiss style plate with clearances for retension pins is mounted onto the Cotton Carrier Universal Adapter plate. To make the whole thing work, I needed to pickup a couple of Button Head, Socket Cap Screws(1/4-20 , half inch length ). Overall, not a bad setup, very sturdy. A bit bulkier than I had wanted, but a good solution that lets me use the Cotton Carrier vest and my Arca-Swiss style clamps. Suggestion to Cotton Carrier: * Machine the plate to allow for retention pins. * Add more 1/4-20 threaded holes( perhaps some non-threaded holes) so that the adjustment can be shifted left/right so that battery doors can be cleared. Revised the review to 4 stars out of give because this is a great piece of machined aluminum. But leaving one star off because the focus on compatibility seems to be on tripods, but they missed the mark with regards to retention pins as well as with regards to being compatible with more camera body bases. Original Review: Just got mine delivered this afternoon. Lovely and very sturdy. Just one problem: No matter how i orient it on my Sony Alpha A77, it blocks the battery door from opening. :( no mention of this on any website. Trying to figure out the best way to get it on without blocking the battery door, as i like the cotton carrier hub and arca swiss mount plate combo. Will update my review after i try out a few more ideas.

I have a CC and really like it, but I do like to use my Tripod too sometimes. This CC adapter works, but is a bit short, as many have noted. Interestingly enough, there is an alternative (the Nicama RL1 Camera Tripod Adapter - B09YDL7FLX). If you look at the photos I attached, you can see how much longer the Nicama adapter plate is over the CC plate. The CC round hub attaches just perfectly to the Nicama and it all functions perfectly. I would recommend the Nicama over the CC adapter plate. My only qualm about the Nicama is that it's just a bit thicker than it needs to be. As for weight, the CC is 69.3g with the gasket and 58.1 without it. The Nicama is 91.2g, so it does add more weight.

Great product did a really good price easy to use

This is a great addition so you can use your long telephone photo lenses and your quick release tripod mount

Wonderful - after some considerable time fitting it to the camera. My primary obstacle was that I use a camera cage. Once I figured out that it fits great to the SmallRig cage, IF it's mounted backwards, then all was fine. My other concern was that someone had reported having to grind down the plate to fit the Arca quick release. I had no issues with my primary tripod head, but it has tension control and allowed the Arca quick release to adjust to the plate. My other tripod has a fixed Arca quick release and will not fit the Cotton Carrier tripod Arca-type adapter plate. But I was going to upgrade it to a tension control head anyway, so it had no impact. I can now go directly from the holster to the tripod in a flash. Note to self: Disconnect the tether before stepping away from the tripod.

それまで使っていたのが、ゴム部分にストラップを通す仕組みで、切れてしまったため購入。 これはストラップホールが金属部分にあるので安心。

The Cotton Carrier Universal Adapter plate works as well and is as useful as I had hoped. I still value the Cotton Carrier's comfort in carrying heavier camera/lens combinations, particularly when prompt accessibility is important, and as I now use a tripod much of the time it is ideal. Of course it's an overly expensive piece of hardware, but the admittedly small group of us who have chosen the incompatibility of Cotton Carrier/Arca Swiss must necessarily pay a premium price for this well made work-around.

El diseño se adapta perfectamente y cumple con su función. Es una solución práctica que evita tener que estar desmontando continuamente el sistema de sujeción del Cotton Carrier para colocar la cámara en el trípode.

Il est bien dommage que le plateau Carrier ne fasse pas partie de l'ensemble Cotton Carrier CC211, l'ensemble, je le trouve excessivement cher mais bon, concernant son utilisation, je trouve cet ensemble pratique pour celui qui veut prendre une photo à l'improviste, pour cela, il suffit de faire un quart de tour pour récupérer son boîtier. À ne pas oublier d'accrocher la sangle de sécurité à l'opposé du boîtier attaché par un anneau dans le cas... Un produit que j'utilise sur mes deux sacs à dos

Très bon choix