Forum Novelties Deluxe Ammo Belt 60 inch - Bullet Belt Halloween Prop Weapon - Gold & Black

I used this for costume pieces and too pieces off for a prop. The sand and paint very well and I still have plenty to wear across me. If you are really tall it will give you plenty of room. If you are shorter you can easily takes peices off and put it back together to get the desired lengh. Very function and helpful. I only had two bullets in the whole set where the bottoms were falling off, I glued them together and never had issues with them and I heavily handled them before sanding and painting.

Man these are HORRIBLE. Straight out of the package the whole thing just fell apart. For ten bucks they are NOT worth it. You had better invest in a hot glue gun at the same time you buy this because you're going to need one no matter what you want to use it for. The problem is that the black connectors are not strong enough to stay clamped onto the bullets, and the bullets disconnect or just plain slide out VERY easily. I couldn't even gently sling it over my head without the whole belt falling to pieces. Wear it for 5 seconds and it's disconnecting and dropping bullets. You'd never even get out of the house with this intact. Every single bullet and black connector piece has flash around the edges and nobody bothered to cut any of it off. The edges are sharp enough to actually irritate my neck. If you feel like making them look decent then you're going to be sitting there cutting a bunch of junk plastic off with nippy cutters or x-acto knife. Then I spent over an hour and half gluing the clasp of one side of the connector pieces to one bullet. Afterwards I to hook them all back together. Fortunately the other side of the connector piece does hold on decently, keeping everything thing in place but still ending up with flexibility to the belt. The only good thing is that you get a decent amount of these things to size it as you want. It can be a long over the shoulder sling, or you can remove some to make a custom-fit belt. And of course you can make those wristbands. I do like that the "brass" color of the plastic is somewhat realistic looking, and they're not just painted. Just be aware of there are definitly modification requirements. It's not difficult but certainly time-consuming. This should not be required...but there ya go.

This was supposed to be an important prop for my Halloween costume, but unfortunately, I couldn't use it at all. The clips that hold the toy bullets in place are too loose to function. The strap broke at least 10 times at different parts of the strap. The item looks great, but does not function at all. I would request a total refund if it was still within the refund time frame, but I guess I'll be fine knowing I wasted $11 on a defective item. For product development purposes, I would recommend the bullets be clipped to one strap instead of being linked to each other. Maybe then, if a bullet fell off, one wouldn't notice or be annoyingly inconvenienced on Halloween night

I’ve been looking for these bullet bracelets everywhere but had no idea what they were called, I know right, then I found these from a cosplay forum and I noticed they were pretty cheap. The only thing is if you plan on doing the MCU Black Widow take note that the paint chips off easily if you plan on snapping them into place with the connector things. Will try with a paint sealer and check if it makes a difference. *not all are pictured just the bracelet. ** So I tried sealing the bracelets with several coats of Mod Podge Basic Gloss and it seems to have stopped the chipping. (Inserted photos) Yes I need to fully paint and coat them but for the most part it works.

It's cheap junk, but in my opinion, it was only $8 for a long string of cheap junk. It looks cool, and it was for Halloween. Like all the other reviewers, the little pieces started immediately and enragingly falling off as soon as you even touched it. Took hot glue to them individually and it worked fine and they didn’t move after that. Don’t expect to wear this immediately out of the package. Disappointingly, as with much of Halloween garb, it’s crappy plastic that probably won’t last unless you put a little bit of work into it.

I use this to cosplay a character which has a couple of bullet belts, my only complaint is that the bullets are easy to fall out of the holder, and it one falls they all fall. I hot glued them to an elastic from the back and spray painted it black, which works like a charm.

Cheap price for large costume accessory. That’s the good news; the bad is that unless this is going on a mannequin, the bullets will slip when moving. Yes, keep the bullets facing down, but it’s still a problem. I paid $8.54, but for less than $10 this should be considered a costume accessory **kit**. I pulled out all of the bullets, spray painted them brass colored (also the clips with flat black), let dry then used a tube of plastic glue to glue a clip to each bullet. After drying overnight, I assembled the accessory back together for my Steampunk costume. Tedious, yes, but the worth easily quadrupled the durability and wearability. Even without painting, some plastic glue would make this a fine costume accessory. I only glued the double band by the bullet down, spread a dot of glue under each band then sliding it down with a little wiggle of the bullet then setting aside. I only glued the backside of the bullet (side of clip without the hole. See picture). There’s 90 bullets and clips so put on a good movie when doing it. It’s like airplane model building. I plan on keeping this for my Steampunk costume so I plan on embellishing it later by hand painting the bullet tips. Note that I sprayed every tenth bullet copper since I had the paint.

I got this for a Halloween costume; I was making a Jayne Cobb bellydance outfit, and this was my dance belt, along with all the pompoms I tied to it. Everyone loved it! It's cheap plastic, but since I was wearing it around my waist, none of the bullets fell out. I think the reviewer that had that happen were wearing it over their shoulder as a bandolier. If I were going to do that, I'd add a dab of hot glue to each one first. The look is perfect!

遠くから見るとそれなりに…

The bullets themselves are great for plastic fakes, but the item as a whole needs a rework. It's far too easy for the belt to come apart as I walk around with it, I wouldn't reccomend using this product on its own; Buy this for the bullets, but get an actual bandolier to put them in.

This is a product I can buy at a dollar store. It’s easily taken apart so I tried to glue them together one by one and still that won’t work. That was a waste of money

安っぽい商品だとは思ってましたが予想以上に安っぽかったです。 銃弾もすぐに取れてハロウィンで使いたかったのに使い物になりませんでした

本体もクリップも塩ビ素材で オモチャだなという感覚が凄いです 塗装をして胡麻化しても玩具感は抜けません クリップから簡単に弾丸が抜けてしまいます ただ100発でこの値段ですので金属製のダミーカートを買うよりはるかに安いです 安いのでサバゲーで振りまわして無くしても苦になりませんし 遠目で見ればあまりわかりませんｗ 気分だけ味わいたなら3本買って2本はたすき掛けでクロスさせ 1本はM60に取り付けてランボーごっこが手軽にできますｗ ただディスプレイ用にするのなら相当見劣りします