Bones Bearings Press Puller Bearing Tool Skate Tool

I live by the beach in Miami and use my longboard to get around almost everywhere, including to and from work as far as 6 miles each way. with all the puddles, sand and surprise florida downpours, i end up cleaning both mine and my girlfriends bearings quite often. I personally don't like using my trucks axles to pry out the bearings so I wanted something that I could use regularly to do this without damaging the bearings. This tool is amazing, its the size of a large keychain trinket, just a few inches long but made sturdy of all metal. The two balls on the end retract when you push the button at the top, allowing you to push it through the bearing, release the button and easily pull the bearing out, if you have spacers like me, you can use this tool just like your truck axels, insert it into the bearing, and use it as a lever to pry the bearing out. it fits so well into the center of the bearing that this causes no damage whatsoever. and it works just as well to push them back in.

Thank goodness for this tool. I nearly had to break my bearings before to get them out of any wheel with an aluminum hub. This sucker pulls them right out. And I don't need a giant bearing press to do it! Presses bearings in, pulls them back out. Has a hole for adding to a lanyard or key chain. Worth every penny.

If you break this product, you must be REALLY pulling/pushing on it. This is a great product and it's really easy to use. Before I bought this I used a screwdriver and my thumbs to put in and push out my bearings. But with this, I can do it really easy. I don't even need to touch the bearings. This is great if you take out an put in bearings a lot. It doesn't damage them at all.

I think it worked great. If you have a long board or skateboard like me then it will only work for 1 bearing per wheel because of the spacer. But if you don't have any spacers then it is a perfect tool for you. It works good for me when I take the spacers out and haven't had any problems. All in all a good tool

It's better than trying to use an axel to pull bearings, but if you've got hard wheels (vanathane, fomacs, etc.), this little tool just doesn't give you enough leverage to really get the bearing out. You can work it for a while and slowly get the bearing to pull, bit by bit, but a hard wheel really needs the leverage of a bonafide bearing press. Either way, it's a nice tiny little tool to keep in a skate bag, and it's proved useful in helping others swap wheels out, specifically when they're using softer wheels.

27SEP2022: Had since 2014. Nice and compact tool. Can push and pull bearings like it’s supposed to. Still looks as if I just pulled it out of the box. No rust. Only wish the handle was a bit larger since I’ve got large hands. But I’m just being picky.

This thing is cool if you wanna pull yout bearings out super quick without damaging them then this tool is the one you want. Ive been skating awhile and have messed up several sets of bearing due to removing from old wheels. Tapping them out of the wheel or using your truck to get them out can damage the outter race which will no longer roll good. So if this problem is what your having i suggest this awesome tool. Easy to carry and small so fitting it in your pockect is not a problem. Thanks Bones awesome product.

I bought this tool out of sheer laziness, but also ti spare the bearings that I felt were still usable. Instead of forcing them out with a screwdriver, it was better for them to be removed by this too. I bet there is another tool in my toolbox that I could have used other than a screwdriver to pry the bearings out, but I wasn't in the mood to find it. I resorted to buying this tool, so that it would be easier. It does work great though. If you are a casual skater and want to change your own wheels and bearings, you should think about it. It really does a great job of getting those bearings out of those old wheels!

Nice

Good quality tool

Produit beaucoup trop cheap pour le prix demandé. Gros défaut de conception: la tige d'extraction est attachée au support en plastique. Le plastique est trop fin et casse. Si vos bearings rentrent facilement dans vos roues, cet extracteur fonctionne, mais dans ce cas pas besoin d'un extracteur, les trucks ou un tournevis suffisent. Si vos bearings sont durs a sortir, l'extracteur est trop cheap pour aider et va briser. Conclusion: ne pas acheter, beaucoup trop cher pour un produit aussi mal conçu, le rendant inutile et de mauvaise qualité.

Very nice

Product build quality is good but too costly and not does his work, it doesn't pull bearing and need to struggle a lot , we can pull bearing from nail easily but not from this tool.