ARKON Mounts - Camera Wall Mount Robust Aluminum Construction Easy Installation Precision adjustments to capture any angle Great security camera mount for CCTV cameras, camcorders, and more

After trying a cheap 10 dollar option that failed miserably I was determined to find something that would just work, even if it cost a little more than I wanted to spend. Let me tell you, I'm so glad I spent the extra few bucks! This thing is so good. I'm using it in a little less traditional sense. I took an idea from one of the reviews here where they had their projector mounted on this and then some T-Track. I refined the design a bit as I wanted this thing to be really sturdy, and it is. I may have put most of my weight and hung off this thing for a split second to make sure it wasn't going anywhere... It didn't budge. Now I can move my camera into virtually any position I want for overhead and top down shots! If I need more range I can just mount more T-Track and bam. This mount uses the standard AMPS mounting pattern of 30x38mm. Mine also had three additional holes in a triangular pattern. I used some M3 head screws and nuts, I think they were 12mm in length. M4 screws will just fit though the holes, but I wanted a little wiggle room to account for just using a hand drill instead of drill press to bore them. The mount articulates very nicely with two ball joints on either end and an elbow joint in the middle. The elbow joint has teeth to keep it locked in place and the ball jointed have a small grooved pattern machined into them to really lock things into place. The camera and lens on here weigh in at only about 1.5lbs, but I can tell you thing can hold a lot more weight than that if it needed to. Not just hold it either, but LOCKS it into place. Super impressed with this mount that I actually purchased a different model Arkon mount to complete my setup.

Price on this was about five times as much as the first mount I ordered--but the sturdiness, quality, fit, and finish were FAR better than the first one. This mounted easily and quickly. The adjustments are almost infinitely variable, and since this is made of cast and machined aluminum you will not worry about this fracturing, bending, falling, or breaking--nor will your worry about your expensive camera or projector falling due to failure of the mount. Another great aspect of this mount? If you were a little off in your measuring for mounting your projector (mine is an LG PF1500 1080p native-res) this will allow you to orient your projector right, left, forward, or back, as long as the mount is low enough to permit those adjustments. For example, my screen's viewing area is approximately 9.5" below the ceiling, and the top of my projector's image begins at the center of its lens. If I need to make adjustments I would want to have the mount far enough from my ceiling to allow a bend in the mount, which would then move the top of the image upward somewhat, toward the ceiling. In other words, if you want such adjustments attach the mount to a wooden block, etc. to get it a little lower, so that adjusting the joints won't raise your projector above where you need it to be. At any rate, I have not found any ceiling mount for a small projector like mine that provides the range of adjustment yet is so sturdy. I have no reservations about heartily recommending this one!

Arkon Camera Wall Mount for CCTV POV Camcorders Cameras For those involved in 'beginner' level video or still photography content creation, this tool is incredible. It allows for a bomb proof set up, incredible flexibility & the strength to handle almost any gear. If you need a reliable and flexible mount to get those crucial 'bird's eye' workbench shots, this fits the bill perfectly. By installing the mounting plate on the underside of a sturdy shelf above your workbench, you will be able to easily capture all the action as you create your cool stuff. Until now, I've been reasonably happy with a couple of Arkon Camera Clamp Mounts. The thing is: they are a BEAR to adjust - the strength required to bend the gooseneck, and the limited range of the swivel head make it a real chore to change your setup. Now that I've experienced the ease of use, quality construction and reliability of this unit, I'll RARELY use the Clamp Mounts. Couldn't be happier. Thank you for creating a product that precisely meets the needs of this particular Maker.

The product looks and feels sturdy. I bought it to mount my camera so I can shoot overhead videos. My only problem is the product didn't come with the screws. Other than that I'm buying another one for my ring light so I can have extra desk space to work on.

This flexible arm is great for different locations and position for your phone. It works good for our meetings

Excellent camera wall mount. Very sturdy, all metal, except for the adjustment knobs and camera stage which are hard plastic. Camera stage has a slightly cushioned rubber mount to gently but firmly tighten the camera in place. Two ball joints and an elbow allow camera orientation in any direction. Ball Joints have slightly serrated surfaces so that they stay fixed. Elbow has teeth mechanism to fix it in place. Wall mount screws are provided and easily hold the entire assembly with a mounted camera. I don't know why other reviewers say it is shorter than advertised, as it is just over 8 1/2 inches exactly as advertised, as shown in one of my photos. Great value for the money and perfect for our studio. Will be getting more of these wall mounts for other rooms in the studio.

It was exactly what I needed. It’s sturdy, easy to install, and holds my camera securely in place. The adjustable arm gives great flexibility for the perfect angle. Perfect for both home and studio setups!

أستخدمته لإضاءة مع سوفت بوكس مقاس ٥٠ لكن لم يتحمل

its good

Très solide, super

Es un brazo de buena calidad, soporta el peso que indica, a mi parecer es un poco corto pero es 100% funcional, validen bien el largo del brazo y vean si se ajusta a sus necesidades