Pentair Pentek 150237 Big Blue Filter Housing, 1" NPT #10 Whole House Heavy Duty Water Filter Housing with High-Flow Polypropylene (HFPP) Cap and Pressure Relief Button, 10-Inch, Black/Blue

It's been a while, but I needed a Big Blue housing for a project. I didn't even know if they were still available, but a quick scan and up pops this Pentek - It's gotta be Pen Pure - right? Wow they're still selling them! Price is right, ordered one right up, couple days later, another Amazon box.... When I saw "Pentair" on the label, I took a deep breath. Not made any better by the "Made in China" that followed. Oh-oh - this could be bad! Hmm.. looks pretty decent, No!, it's good! (Pentair is a huge industrial corporation, highly respected) I was in the commercial water treatment/RO business back in years ago, and the Pen Pure brand was well respected, as was their version of the standard Big Blue 4.5" (in 10 or 20") housing, often used as a prefilter for smaller commercial RO systems with a depth filter and a CBC to prep for a TFC membrane. That's what this is being used for, and I'm very happy to say, the quality is as good as they were back 20+ yrs ago. You can't say that about too many things that have aged that long and had their manufacture moved to China. I wish it was made in the US, but if it had, I doubt it would be sold at this price point. (We used to get a case of 4 for $99, and once in a while the wholesaler would throw in elements if you bought a few boxes) Small things tell you about quality, and how much a manufacturer cares about it. As always, I grabbed my silicone grease to lube the o-ring, and I also grease the threads lightly too to ease removal and prevent "plastic stick" which can be annoying on this size housing. Anyway, I opened it up and there was the o-ring (not in the groove, in the bowl - a good thing, so it doesn't take a set) and it was already lightly lubed up. A manufacturer that cares enough to do that cares about their product. Always, and still a Penn-Pure/Pentek/Pentair Big Blue customer. 5 stars across the board! Even "Flavor" - I assume they mean the water? That would depend more on the element than the housing, and raw water. One negative - No L bracket and screws with the housing. They used to come gratis, heck I had dozens of them floating around I didn't need, now think I can find one? Still giving five stars on "Ease of install" even though I should take one back, I figure these are available in 1" and 3/4" which saved me some grief. If you're listening, Amazon and Pentair, at least mark "bracket not included" and link one. They're not the same as a standard 10" x 2.5 one. The bolt pattern on a Big Blue is 3" x 3" with 4" to center to the bend - hope that helps someone out. (love that they kept the Imperial pattern) You can drill and tap 1/4npt for a gauge, and the original brackets are notched both sides to clear the bleeder and gauge (and allow 'flipping' if necessary) Bottom Line: These are a high quality housing at a fair price, and I highly recommend them.

I've had two of these installed in series as a whole-house water filtering system for just over a decade. One day I was reading that the manufacturer recommends replacing the housing every 10 years, and knowing mine were at least that old I thought I'd see if they're still available. They are, I purchased two new ones, and they appear to be exactly the same quality... pretty rare for so many products now-a-days that get worse yet more expensive with time. These things are really cost-effective, even if you toss them every 10 years or so. And it's easy to swap out filter elements if you use a little food grade silicon on the o-ring and threads and don't tighten them too much. I suspect my originals would have lasted forever as they are made really well... and I did put the old ones in a box to save them for an unlikely emergency. But with new ones I should be good to go for a long time. Highly recommended!

I use this for a pre-filter and for recharging the water softener on my RV. Need the clear one to see when the salt is done for recharges. Very sturdy. Has plastic threads for in/out, but with them being 1", you just screw in a brass fitting and they are very secure. Really love the build quality of Pentair housings. Had normal big blues before and they were extremely durable. I do use a pressure regulator keeping the pressure at 50 psi or below, so I can't speak to whether the clear housing will take higher pressures...but these are pretty hefty and well built. Just don't leave the clear housing out in the sun...they are not UV resistant (per Pentair).

This is different from my original one. The old housing required two O-rings and this new housing one requires one. It took me over two months to get an answer from the company and I found out that I have to replace the cap as this housing is not compatible with the old cap.

This big blue worked excellently for me

Great quality. Solid build and worked well with the components I used to build my filtration system.

OK +

Excelente producto, cumplió con la función que requería.

These 10-inch Pentek enclosures are a perfect size for a whole house filter. It has 1" inlet/outlets but they are easily reduced down to 3/4" with a reducer or a bushing, if required. There is also a 3/4" inlet/outlet model but make sure that the prices are similar, because the price of this 1" model was much lower than 3/4" when I bought it. The filter housing itself is very well made and the pressure relief button on the top is key to "no mess" filter changes. You just have to make sure to not over-tighten the housing when you install it (see instructions) and you should be all set. By the way, this filter housing accepts 4.5x10" filters and if you only have one filter housing for your house, you can get dual-density filters for improved filtration. Search Amazon for Pentek DGD-5005 and Pentek DGD-2501. We're on a deep well and the finer DGD-2501 model lasts about a year before we notice the pressure drop. Pentek DGD-5005 is probably sufficient in most cases though and will minimize the need for filter changes. ------------- If you found this review helpful, please let me know by clicking the "Helpful" button below. I regularly check back on my reviews and try to adjust their style and content based on the Helpful votes.

Pentair makes good quality products and this filter is no exception. Since its a standard size 10“ water filter there are a lot of filter cartridges that will fit this model. While it didn't come with a mounting bracket, i found the Rainfresh BH010-6 bracket was a perfect match. Additionally, the Rainfresh CK2 adapter kit allowed for a quick & simple connection to the copper piping i cut in.

solid, only issue the O ring leaked, had no silicone lube, no instructions, (as if I needed it). Made my own holding plate and the undersized screws cracked the plastic on the lid, hum....so ordered other o rings and silicone lube and managed to have it work.